<VV> Glove box lock

[airvair]

If memory serves me right, you insert the key and hold the lever down.
Then push the lock button in and turn it a quarter turn to the left. I
don't think that you need a wire poked in it like an ignition switch. It
will come right out.

-Mark

J R Read_HML wrote:
> 
> Sam,
> 
> I did this a LONG time ago...  Don't remember the specifics, but it was not
> hard to do.  I DO recall that I got a packet of several hooks and they were
> not all the same length.  Had to do it twice to get the right one installed
> so that the door would open smoothly and also close tightly.
> 
> Later, JR
>
> Subject: <VV> Glove box lock
> 
> > The lock lever that catches the plate is broken.  I have another lock and
> > would like to switch the lock parts so I can use the same key.  Can
> someone
> > tell me how to disassemble the locks and change the parts
> >
> > Thanks
> > Sam Andolino
> >
> > 63 Conv
> > 66 Turbo