<VV> Rotisserie rental? / now car roller

[J R Read_HML]

Heck,

I just removed the rocker molding and the door handles.  Four guys (maybe it 
was 5?) lifted the car onto it's side (powertrain in car).  Laid heavy 
cardboard on the garage floor.  Worked for me.  Have to make sure the low 
side cylinders are clear of oil before attempting to start, after putting 
back upright.

Attachments (if any) are scanned with anti-virus software.

Later, JR
'61 Rampside Standard 4/110
'65 Monza Convertible 4/140
'66 beater Coupe - icemobile 4/140

----- Original Message ----- 
From: "werp knarly" <werpknarly@centurytel.net>
To: <virtualvairs@corvair.org>
Sent: Monday, November 29, 2004 10:49 AM
Subject: Fw: <VV> Rotisserie rental? / now car roller


> someone also sells a unit you bolt to the tires on one side, than roll the 
> car on its side, i think its a lot cheaper and it will support a car with 
> the powertrain.
>
> Thanks!
>
> Joe, Lisa, Teegan, and Mina
> ----- Original Message ----- 
> From: "Dave Morris "BigD" (by way of "Harry Jensen, CORSA Executive 
> Secretary" <corsa@corvair.org>)" <BigD@DaveMorris.com>
> To: "Virtual Vairs" <virtualvairs@corvair.org>
> Sent: Monday, November 29, 2004 8:25 AM
> Subject: <VV> Rotisserie rental?
>
>
>> I've been looking at the "rotisserie" concept for cleaning and repainting 
>> my Corsa.  It looks like the ideal way to clean up the entire body, paint 
>> it, and get ready to re-assemble.  I just don't like the cost of buying 
>> one just to put one car back together.  Have any of you found rotisseries 
>> that can be shipped to my location and rented for a month or two?  I'm in 
>> the Dallas Ft. Worth area.  Also, are there places that rent garage space 
>> with a rotisserie or a lift?
>>
>> Thanks,
>> Dave Morris
>>
>>
>>
>> |--------------------------------------------------------------
>> | Harry Jensen  mailto:corsa@corvair.org
>> | CORSA Executive Secretary
>> |
>> | Corvair Society of America (CORSA)
>> | P.O. Box 607, Lemont, IL 60439, 630.257.6530  fax 630.257.5540
>> | http://www.corvair.org
>> |-------------------------------------------------------------- 
>> _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights 
>> are the property
>> of the writer, please attribute properly. For help, 
>> mailto:vv-help@corvair.org
>> This list sponsored by the Corvair Society of America, 
>> http://www.corvair.org/
>> Post messages to: VirtualVairs@corvair.org
>> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs 
>> _______________________________________________
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help@corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs@corvair.org
> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs 
> _______________________________________________