<VV> PG problem

[UltraMonzaWest@aol.com]

In a message dated 9/8/2004 3:36:38 PM Pacific Daylight Time, jld@wk.net 
writes:

> If you idle rpm is set to 600 rpm in neutral (500 in drive) then check the 
> engine vacuum.  It needs to be better than 14 inches and 16 inches or 
> better is perfect. 
**********************************************************************

I try for 525  in N  and 475  in D.......the high vacume [ at the choke 
pulloffs / balance tube tap]  shows that the idle is slow enough...


Matt