<VV> Re: So, um (Swell thread description, eh?)

[Shaun]

Brilliant!
  <Smit>----- Original Message ----- 
  From: NicolCS at aol.com 



  On one cylinder, remove rocker arms, studs, guide plates, pushrods, and tubes, then reinstall and torque the studs to 30#.  Repeat on a second cylinder. On the third cylinder remove rocker arms, studs, guide plates, pushrods, and tubes, install the baffle, then reinstall all components and torque the studs for that cylinder to 30#.  Then, one cylinder at a time, go back to the other cylinders and untorque the studs, reinstall components, and torque the studs to 30#.  At the end, you will have to adjust the valves using your favorite method.  
  <unSmit>