<VV> fanz - SPAL #30102113

[Ron]

Just what is the pressure above the cylinders?  It's not in Bob's book.
RonH

----- Original Message ----- 
From: <JVHRoberts at aol.com>
To: <lechevrier at earthlink.net>; <virtualvairs at corvair.org>
Sent: Tuesday, August 02, 2005 6:12 PM
Subject: Re: <VV> fanz - SPAL #30102113


>
> Hmmm... looks like the right flow rate, but the pressure is FAR lower than
> what a Corvair fan generates.
>
>
> In a message dated 8/1/2005 10:35:06 P.M. Eastern Standard Time,
> lechevrier at earthlink.net writes:
>
>> Do  you, or anyone, happen to have the pressure vs. flow curves
>> of this  particular fan?
>
> *IF* this is the right fan:
>
> 16" SPAL Puller 12  Volt Fan
> Part No. FRP-35116
> Static Pressure Inches H?O     Air  Flow (CFM)     Current (Amps)
> 0.60          1390         22.2
> 0.40  1720      21.8
> 0.20                2040         21.7
> 0.00        2360          21.6
>
> Or, you might find these data sheets to be more  interesting:
>
> http://www.spal-usa.com/pdfs/16Fans.pdf
>
> Their 16"  3000 cfm Ex Perf fan, # 30102113 is listed as a puller and is
> not in the  pdf data sheets. I believe Tom was using a pusher version of
> this fan, if  not this fan - the price would be  right.
>
> Bill
>
>
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>