<VV> Junkyard wheels

[James Davis]

S-10 and Blazers of 2 wheel drive have a 2.80 inch wheel center and the 4 
wheel drive have a 3.30 inch wheel center.
Jim Davis

At 09:28 AM 8/26/2005, Bryan Blackwell wrote:
>I forgot about those - they are definitely worth investigating.  I know 
>the wheels have been used on an FC.  Look for 2wd versions, I measured a 
>4wd wheel once and it had about 5 3/4" backspace (looks like a bit too 
>much).  Now, aftermarket 4wd wheels may be ok, some have less backspace.
>
>--Bryan
>
>On Aug 26, 2005, at 9:35 AM, NicolCS at aol.com wrote:
>
>>Another possible source: Chevy S-10s and S-10 Blazers used 5 on 4.75
>>wheels.
>>  I don't know what the backspacing is nor have I tried them on a
>>Corvair.
>
>_______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are 
>the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: 
>http://www.vv.corvair.org/mailman/options/virtualvairs 
>_______________________________________________