<VV> Re: DUAL MASTER CYL

[JVHRoberts at aol.com]

Given that denatured alcohol residue is a BYOTCH to remove without drying  
out the system with heat, a vacuum pump, etc. (do NOT blow air through it, as  
that will just add moisture!), I'd suggest NOT doing this. Flush with brake  
fluid. 
 
In a message dated 12/4/2005 11:33:15 P.M. Eastern Standard Time,  
slowboat at mindspring.com writes:

Any  reason why it's not OK to flush, with denatured alcohol, lines that  have
previously been used with DOT3, preparatory to changing over to  DOT5
(silicone)?

Thanks
Andy Clark