<VV> wiper lubrication again

[UltraMonzaWest at aol.com]

In a message dated 2/26/05 8:52:51 PM Pacific Standard Time, 
Norgehyde at aol.com writes:


> Again I am asking if anyone has any ideas how to lubricate and/or grease 
> the 
> Hub in which the wiper blade attaches too and is the end/beginning of the 
> linkage and attaches to the car for a '66 140 corsa convert. I received one 
> suggestion that while helpful was directed at the wrong part of the linkage. 
> it was 
> to drill out the rivet and lubricate then reassemble but I am not referring 
> to 
> the midpoint connections. I am referring to the actual cylinder that the 
> wiper attaches to and the sleeve it rides in. Is there anyway to lubricate 
> this 
> area or is there any way to dismantle (remove) the inner rod from the 
> sleeve. i 
> can see no way to so it. thank you for reading this
> 
> Eric W. Holte
> Commack, NY
> 1966 corvair corsa convertible, 140Hp, 4 on the floor, 2 speed wiper with 
> washer 
> 
************************************************************
Place each end in a bath of solvent 1st,  then a lubricant.  Let set for 24 
hrs in each step.



Matt Nall
65/66/69/DB/BT
Coos Bay, Ore.