<VV> Heater control cable question

Ron ronh@owt.com
Sat, 1 Jan 2005 12:38:51 -0800


It also seems to cause severe corrosion if left on.
RonH

----- Original Message ----- 
From: "R. Byers" <rbyers03@tampabay.rr.com>
To: <virtualvairs@corvair.org>
Sent: Saturday, January 01, 2005 7:17 AM
Subject: <VV> Heater control cable question


> One of the truly great inventions of the century is a product called 
> kroil,
> from Kano Labs, which actually penetrates rust.  I have seen it used it on
> military equipment at sea where one would expect nothing would ever come 
> loose
> and it was remarkable.  Forcing it into the cable without removing it 
> might be
> a problem however.
> We used to tie a collar around one end of a frozen or sticking cable, hang 
> it
> vertically with a receptacle (can) at the bottom and pour some Kroil in 
> the
> top. In a day or so, the results were truly amazing.
>
> Ron Byers
> Largo, FL
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help@corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs@corvair.org
> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
> _______________________________________________