Fwd: <VV> LM rear hub assembly

[HallGrenn@aol.com]

Ron,  I just put the '66 and later hubs on my '65's (Conv. and Corsa Cp)  You 
get the stronger straps, yokes and bolts in one piece.  I wouldn't recommend 
drilling out the '65s for the later bolts unless you hava a good setup to be 
sure you're not weakening them.  There is a lot of load on those pieces even in 
everyday driving.

Bob Hall
Return-Path: <virtualvairs-admin@corvair.org>
Received: from  rly-yd06.mx.aol.com (rly-yd06.mail.aol.com
  [172.18.141.70]) by air-yd02.mail.aol.com (v104.17) with ESMTP id
  MAILINYD23-77841f15bf235c; Fri, 21 Jan 2005 14:46:15 -0500
Received: from  tiger.skiblack.com (tiger.skiblack.com [216.181.62.106])
  by rly-yd06.mx.aol.com (v104.17) with ESMTP id
  MAILRELAYINYD62-77841f15bf235c; Fri, 21 Jan 2005 14:45:59 -0500
Received: from tiger.skiblack.com (localhost.localdomain [127.0.0.1]) by
  tiger.skiblack.com (8.11.2/8.11.2) with ESMTP id j0LJjVN25746; Fri, 21
  Jan 2005 14:45:31 -0500
Received: (from mail@localhost) by tiger.skiblack.com (8.11.2/8.11.2) id
  j0LJiu625732; Fri, 21 Jan 2005 14:44:56 -0500
X-Authentication-Warning: tiger.skiblack.com: mail set sender to
  edbaloo@verizon.net using -f
Received: from out014.verizon.net (out014pub.verizon.net
  [206.46.170.46]) by tiger.skiblack.com (8.11.2/8.11.2) with ESMTP id
  j0LJisN25729 for <virtualvairs@corvair.org>; Fri, 21 Jan 2005 14:44:54
  -0500
Received: from Andrew ([64.222.229.104]) by out014.verizon.net
  (InterMail vM.5.01.06.06 201-253-122-130-106-20030910) with ESMTP id
  <20050121194445.DXTC28388.out014.verizon.net@Andrew> for
  <virtualvairs@corvair.org>; Fri, 21 Jan 2005 13:44:45 -0600
From: "RKAT" <edbaloo@verizon.net>
To: <virtualvairs@corvair.org>
Message-ID: <003a01c4fff2$23d078d0$2f01a8c0@Andrew>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook, Build 10.0.2627
X-Authentication-Info: Submitted using SMTP AUTH at out014.verizon.net
  from [64.222.229.104] at Fri, 21 Jan 2005 13:44:41 -0600
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98e
X-Converted-To-Plain-Text: Alternative section used was text/plain
Subject: <VV> LM rear hub assembly
Sender: virtualvairs-admin@corvair.org
Errors-To: virtualvairs-admin@corvair.org
X-BeenThere: virtualvairs@corvair.org
X-Mailman-Version: 2.0.9
Precedence: bulk
List-Help: <mailto:virtualvairs-request@corvair.org?subject=help>
List-Post: <mailto:virtualvairs@corvair.org>
List-Subscribe: <http://www.vv.corvair.org/mailman/listinfo/virtualvairs
  >, <mailto:virtualvairs-request@corvair.org?subject=subscribe>
List-Id: Corvair discussion <virtualvairs.corvair.org>
List-Unsubscribe: <http://www.vv.corvair.org/mailman/listinfo/virtualvai
  rs>, <mailto:virtualvairs-request@corvair.org?subject=unsubscribe>
List-Archive: <http://www.vv.corvair.org/pipermail/virtualvairs/>
Date: Fri, 21 Jan 2005 14:48:08 -0500
X-AOL-IP: 216.181.62.106

Hi all. I picked up a used rear LM hub assembly with the backing plate.
What is the difference between the 65 and the 66-69 versions? Is it just
the U-joint bolt size? Thanks!! And have a great weekend!!

 

 

Ron Tinkham

http://www.ronsjeepjunk.4t.com/

Pine Tree Corvairs (in the works)

66 Corsa Convertible, 140, 4sp

Maine
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help@corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs@corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs 
 _______________________________________________