<VV> Calibrate Fuel-Level Sender?
J R Read_HML
hmlinc@sbcglobal.net
Sat, 29 Jan 2005 00:05:51 -0600
Oh... "Bend to adjust" = Calibrate!
Now I get it!
Attachments (if any) are scanned with anti-virus software.
Later, JR
'61 Rampside Standard 4/110
'65 Monza Convertible 4/140
'66 beater Coupe - icemobile 4/140
----- Original Message -----
From: <UltraMonzaWest@aol.com>
To: <virtualvairs@skiblack.com>
Sent: Friday, January 28, 2005 10:45 PM
Subject: Re: <VV> Calibrate Fuel-Level Sender?
> If your gauge is seeing 0 and 90 ohms......then just bend the rod!
>
> reads 3/4 when full..but has 90 ohms.......bend last 4" of rod to move
> float down...
>
>
> Matt Nall / Patiomatt / WCUH / Chairman V V
> 69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
> Somewhere between Reno, NV and Coos Bay, Or.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help@corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs@corvair.org
> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
> _______________________________________________