<VV> Brake problems on my 63

[Rick Loving]

Thanks,  

There were several private replies regarding the MC pressure release
valve not functioning correctly.  I will go after the MC and see if that
is the issue.

Rick Loving

-----Original Message-----
From: virtualvairs-admin@corvair.org
[mailto:virtualvairs-admin@corvair.org] On Behalf Of
UltraMonzaWest@aol.com
Sent: Saturday, January 29, 2005 1:24 PM
To: virtualvairs@skiblack.com
Subject: Re: <VV> Brake problems on my 63

In a message dated 1/29/2005 10:10:15 AM Pacific Standard Time, 
ral1963@earthlink.net writes:

> What would be the next logical thing to try and fix to solve my
dilemma?
>
************************************************************************

I would kit / replace the MC.....sounds like it's not relasing the fluid

pressure.....crud at the front of the bore......easily cleaned...




Matt Nall / Patiomatt / WCUH / Chairman V V
69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
Somewhere between Reno, NV and Coos Bay, Or.
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help,
mailto:vv-help@corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs@corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs 
 _______________________________________________