<VV> Location pins

[corvair at mb.sympatico.ca]

There was a bit of a typo in my original note - should have said "big Phillips machine screws (heads are about 1/2" ACROSS)."
> 
> From: "Harry Yarnell" <hyarnell1 at earthlink.net>
> Date: 2005/06/02 Thu PM 03:41:22 CDT
> To: <corvair at mb.sympatico.ca>, 
> 	<virtualvairs at corvair.org>
> Subject: Re: <VV> Location pins
> 
> Yup, that's exactly what's in mine.
> 
> Harry Yarnell
> perryman garage and orphanage
> perryman, MD
> hyarnell1 at earthlink.net
> 
> ----- Original Message ----- 
> From: <corvair at mb.sympatico.ca>
> To: <virtualvairs at corvair.org>
> Sent: Thursday, June 02, 2005 12:28 PM
> Subject: <VV> Location pins
> 
> 
> > No location pins on late models (there's no place in the top windshield
> frame for them to plug into). The big threaded holes in the front bow should
> be filled with big Phillips machine screws (heads are about 1/2" apart).
> >
> > Les
> > (just rebuilt top frame)
> >
> >  _______________________________________________
> > This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> > of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> > This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> > Post messages to: VirtualVairs at corvair.org
> > Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> >  _______________________________________________
> 
> 
>