<VV> Exhaust manifold question

[Ron]

Aren't there nuts on the studs, not bolts?  Use a nut splitter.  If not 
nuts, I can't imagine what you have there.
RonH

----- Original Message ----- 
From: "Norman C. Witte" <ncwitte at wittelaw.com>
To: "'VirtualVairs'" <virtualvairs at corvair.org>
Sent: Wednesday, June 08, 2005 2:12 PM
Subject: <VV> Exhaust manifold question


> This is one of those basic shop skills questions.  The exhaust manifolds
> from my '65 turbo look to be in pretty good shape, but on one of them the
> studs to which the exhaust pipe flange bolts are frozen and it looks like
> rust has thinned them.  I think there's a pretty good chance that if I
> torque on these puppies they will break off.  Any suggestions on what to 
> do
> here?  I have been soaking them with PB Blaster off and on for the last
> week, but I am skeptical of doing anything except breaking them.
>
>
>
> Norm Witte
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>