<VV> RE: How to make bucket seats firmer?

[J R Read_HML]

Replace the Buns!  ... with new ones.

Attachments (if any) are scanned with anti-virus software.

Later, JR

----- Original Message ----- 
From: "Keith Hammett" <khammett at stainlessfab.com>
To: <virtualvairs at corvair.org>
Cc: "'Ron'" <ronh at owt.com>
Sent: Tuesday, March 08, 2005 2:52 PM
Subject: RE: <VV> RE: How to make bucket seats firmer?


> Spring wire if you got it.  Can get free for the taking from old box
> springs.
>
> Keith Hammett
>
> -----Original Message-----
> From: Ron [mailto:ronh at owt.com]
> Sent: Tuesday, March 08, 2005 2:37 PM
> To: khammett at stainlessfab.com
> Subject: Re: <VV> RE: How to make bucket seats firmer?
>
>
> Stiff wire or spring wire?
> RonH
>
> ----- Original Message -----
> From: "Keith Hammett" <khammett at stainlessfab.com>
> To: <virtualvairs at corvair.org>
> Sent: Tuesday, March 08, 2005 12:29 PM
> Subject: <VV> RE: How to make bucket seats firmer?
>
>
>>
>>
>> -----Original Message-----
>>
>> You can take a stiff wire (same gauge or heavier than the springs) and 
>> use
>> a
>> 5 prong clip to attach the wire to the springs.  Do this across the
>> springs
>> in several locations from front to back.  This will help to distribute
>> your
>> load across all springs evenly.
>>
>> What was your solution to the cotton batting?
>>
>> Keith Hammett
>>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________