Fwd: <VV> Wiper grille fit...
corvair at mb.sympatico.ca
corvair at mb.sympatico.ca
Mon May 9 13:15:20 EDT 2005
That's what I ended up doing... tweaked the grille, and the mounting bracket, and ended up with a near perfect fit after half a dozen attempts.
Thanks,
Les
>
> From: HallGrenn at aol.com
> Date: 2005/05/09 Mon PM 12:03:31 CDT
> To: virtualvairs at corvair.org
> CC: corvair at mts.net
> Subject: Fwd: <VV> Wiper grille fit...
>
> In a message dated 5/7/2005 8:59:14 PM Eastern Daylight Time, corvair at mts.net
> writes:
>
> > Trying to refit the wiper grille on my '65. The passenger side wiper
> > post really has some trouble fitting...
>
> My '65 Corsa was the same way. Both the grill and the shaft needed work.
> The grill was bowed so I took the time to fit it without the shaft in place
> first. I used the palm of my hand (I'd probably use a folded towel on the grill
> and a rubber mallet today) to take the bulge (bow) out of it around the wiper
> shaft hole. I also replace the shaft as it was bent slighly upwards and
> interfered with the grill.
>
> It's what Rolls Royce used to call "fitting pieces together" before laser
> alignment etc.
>
> Bob Hall
> Group Corvair
> '64 Brier
> '65 Corsa
> 2 '68 Monzas
>
>
More information about the VirtualVairs
mailing list