<VV> Stuck needle--jet too?

[Chuck Kubin]

Thanks G,
  The impact driver actually worked better than I hoped. By that time I buggered the slot quite badly, but the downward force of the impact driver actually swaged in a new slot.
  So I did succeed one step short of drilling, but your note on the size is muiy handy, given my desire to not mangle the threads.
   
  Chuck
  
Geoffrey A Johnson <geoffj at unm.edu> wrote:
  Chuck,
To remove a stuck jet, that is really stick, drill it out. Start with a 
small bit and move progressively up, to just smaller then 5/16. This will 
leave jsut the threads, and then they can be pulled right out.

-Geoff



On Wed, 30 Nov 2005, Chuck Kubin wrote:

> Hey Matt,
> Do you suggest this as well for removing the jets? Some of them seem to really be stuck in good. The last one I took out with a hammer-blow impact driver.
>
> Chuck Kubin
>
> UltraMonzaWest at aol.com wrote:
> In a message dated 11/29/2005 7:45:24 PM Pacific Standard Time, pp2 at 6007.us
> writes:
>
>> Anyone have a suggestion on how to get it out ?
> ******************************************************************************
> ******
>
> Heat the carb body in an oven.....the growth of the needle will break loose
> whatever is capturing it....when it cools....should fall out...
>
> Matt Nall / Patiomatt / WCUH / Mr. DeckRug
>
>
> ---------------------------------
> Yahoo! Music Unlimited - Access over 1 million songs. Try it free.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
  


		
---------------------------------
 Yahoo! Music Unlimited - Access over 1 million songs. Try it free.