<VV> Paint problems
4carbcorvair
4carbcorvair at gmail.com
Fri Sep 16 07:51:24 EDT 2005
After sand blasting, the metal pieces should be SANDED. I have seen a lot of
people sand blast a part than not get a smooth/desired finish. Sandblasting
makes the surface very ruff. If the metal is sanded, the roughness is
removed and allows a smoother finish.
If the spray can/gun is held too far away, the paint can start to dry
before it hits the panel, allowing a dry looking finish.
Overspray from painting the back side of a panel, or an adjacent panel can
fall onto a painted panel and give a dull/dry finish.
--
Ron Tinkham
66 Corsa Convertable, 140, 4sp.
Maine
More information about the VirtualVairs
mailing list