<VV> Jetting on (part 2)

Garth Stapon stapon1 at earthlink.net
Thu Sep 22 19:59:13 EDT 2005


Warren:

Thanks for the on topic post.

Regards, Garth

-----Original Message-----
From: Levair at aol.com
Sent: Sep 21, 2005 9:24 PM
To: AeroNed at aol.com, virtualvairs at corvair.org
Subject: Re: <VV> Jetting on (part 2)

In a message dated 9/21/05 3:20:53 PM Eastern Daylight Time, aeroned at aol.com 
writes:

<< would a person determine the proper size jets for the engine? >>

Decide what will be you maximum rpm. Jet way too large. It won't reach the 
max rpm. Keep reducing the jet size until you can reach the rpm.
  Conversely; jet way too lean and make it richer until you overcome the 
stumble at quick throttle .
Warren
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________



More information about the VirtualVairs mailing list