<VV> Timing Gear ?

[UltraMonzaWest at aol.com]

In a message dated 4/19/2006 11:25:23 AM Pacific Daylight Time, 
rsampson at swbell.net writes:

>  Timing mark was about 30 degrees, way off from where it normally.
>   Did I miss anything?
>  Are there any other indicators that the cam may have skipped a tooth 
> without taking it apart?
> 
------------------------------------------------------------------------------
--------------------------------
No skipping allowed!   We don't do that!  gggg

Either your cam gear or crank gear is slipping....might as well 
dismantle.....time to check takes longer....

quickest check:

Check Compression..way down..but even?   Slipping!  Parts are 46-37  years 
old....



Matt Nall / Patiomatt / WCUH / Mr. DeckRug
69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
Somewhere between Reno, NV and Coos Bay, Or.
http://members.aol.com/patiomatt    Corvair Info!