<VV> 1965 ignition wiring question

[Harry Yarnell]

Condenser on the OUTSIDE of the coil goes to the + side of the coil.
The condenser INSIDE the distributor goes to the points.

harry yarnell
perryman garage and orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "John McMahon" <jmac2112 at adelphia.net>
To: "Virtual Vairs" <virtualvairs at corvair.org>
Sent: Thursday, December 07, 2006 9:42 PM
Subject: <VV> 1965 ignition wiring question


> Hello all,
>
> I'm hooking up my coil and distributer on my 1965 Monza 110 with stock 
> points system, and I want to make sure I've got this right.  The shop 
> manual and assembly manual seem to be saying the following:
>
> Black/Yellow wire from harness to + terminal on coil
>
> Wire from distributer to -- terminal on coil
>
> Wire from condenser to -- terminal also
>
> Is this correct?  I've heard of mistakes in the manuals, so I want to be 
> sure.
>
> Thanks,
>
> John McMahon
> 1965 Monza coupe 110
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________