<VV> Re: Pulling a Pilot Bushing

jwcorvair at aol.com jwcorvair at aol.com
Sun Feb 19 12:20:48 EST 2006


I haven't seen anyone mention using 1/4-20 square nut and a round-head slot screw. Push the square nut through the pilot bushing, hold with a small screw driver while turning in the round-head screw. After the square nut binds against the pilot bushing, keep turn and the bushing pulls out. Takes less than 30 seconds to pull the bushing this way.
 
Regards,
Joe White (62 sedan, 66 Porvair)
CORSA, RMC


More information about the VirtualVairs mailing list