<VV> LM clutch return spring question
Harry Yarnell
hyarnell1 at earthlink.net
Sun Feb 19 20:46:33 EST 2006
It hooks to the parking brake cable end.
Harry Yarnell
Perryman Garage and Orphanage
hyarnell1 at earthlink.net
----- Original Message -----
From: "John McMahon" <jmac2112 at adelphia.net>
To: "Virtual Vairs" <virtualvairs at corvair.org>
Sent: Sunday, February 19, 2006 7:58 PM
Subject: <VV> LM clutch return spring question
>I have a 1965 Monza coupe, and while I had the engine out, I performed the
>operation described in the Tech Guide on p. 6 of the Transmission section
>(Noise Reduction in Stick Shift, by Milton Binon). Seems like it should
>work, but now I have nowhere to attach the short spring (the one that
>attaches to the bracket bolted to the body). But what exactly is the
>function of this spring? It is not the return spring (that's the long one
>attached to the differential), so what does it do? Is it essential? I
>know that GM would not have spent the dime it cost them if they hadn't felt
>they needed to. I'd just like to know why they did!
>
> Thanks,
>
> John McMahon
> 1965 Monza coupe
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
More information about the VirtualVairs
mailing list