<VV> Engine Wiring Harness

[Norman C. Witte]

Mike,

Ned's right, and there should be a similar black and yellow wire that goes
to the positive side of the coil.  '65 Shop Manual, page 12-27 shows it if
you want to see the schematic.

Norm Witte

> -----Original Message-----
> From: virtualvairs-bounces at corvair.org
> [mailto:virtualvairs-bounces at corvair.org]On Behalf Of AeroNed at aol.com
> Sent: Thursday, March 02, 2006 10:21 PM
> To: virtualvairs at corvair.org
> Subject: Re: <VV> Engine Wiring Harness
>
>
> Moose,
>
> It is the tach wire which should be connected to the negative
> side of the
> coil.
>
> Ned
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all
> copyrights are the property
> of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________