<VV> brake job--a few questions

[Harry Yarnell]

Also don't forget that if the shoes have different length friction material, 
the bigger shoe goes to the REAR.

Harry Yarnell
Perryman Garage and Orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: <UltraMonzaWest at aol.com>
To: <virtualvairs at corvair.org>
Sent: Monday, March 20, 2006 2:26 PM
Subject: Re: <VV> brake job--a few questions


> Do one wheel at a time!  That way you have the other to look at!
>
> The tapered coil goes on the rear shoe....as does the washer.....E-Brake
> linkage pin.
>
> Matt Nall / Patiomatt / WCUH / Mr. DeckRug
> 69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
> Somewhere between Reno, NV and Coos Bay, Or.
> http://members.aol.com/patiomatt    Corvair Info!
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>