<VV> Oil Pan Questions
UltraMonzaWest at aol.com
UltraMonzaWest at aol.com
Fri Mar 24 14:32:32 EST 2006
In a message dated 3/24/2006 9:57:56 AM Pacific Standard Time, pp2 at 6007.us
writes:
> I always thought a deeper oil pan was to allow more oil capacity while
> keeping the crank from getting into the liquid. In that case the dipstick
> marking stays in the same place. OTOH if the purpose is to get the crank
> out of the liquid then the marking would change. In either case the pickup
> should be lowered to match the new bottom.
>
> Padgett
>
******************************************************************************
**************************
Pag! Vairs have a built in windage tray.....many consider it "dry sumped]
The deep pans are for:
1 Extra oil for cooling while towing / using AC
2 To LOWER the oil level so as not to flow into the pushrod tubes/ get
sucked in the intake stems when cornering REAL HARD...
Matt Nall / Patiomatt / WCUH / Mr. DeckRug
69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
Somewhere between Reno, NV and Coos Bay, Or.
http://members.aol.com/patiomatt Corvair Info!
More information about the VirtualVairs
mailing list