<VV> Autometer Cylinder Head temp gauge

[Sethracer at aol.com]

In a message dated 11/29/2006 3:08:32 PM Pacific Standard Time,  
rsampson at kc.rr.com writes:

All:
I really liked the Autometer series, however, I  was not able to 
locate either the vacuum nor the head temp  guage.
Has anyone found a suitable vendor that has ALL the  guages necessary 
for a  Corsa replacement ?

Thanks
Rodney  Sampson
HACOA



Well - I am looking at the Autometer Dual Channel Cylinder head temp gauge.  
It uses two thermocouples and an adjustable temperature module. The module  
allows you to save the peak readings of either input, select one or the other  
and to set an alarm for either or both channels. The gauge face reads from 100  
to 600 degrees (F) The gauge is 2 5/8" size and appears to be a P/N 2650-989. 
 but I believe they have a 2 1/16" gauge as well. Let me know if you find  
out any more. I intend to install this unit on my Currently under construction  
race car - Goal is Los Angeles in 2008.  - Seth  Emerson