Finding Shorts Re: <VV> batteries

[BobHelt at aol.com]

In a message dated 9/13/2006 1:59:26 PM US Mountain Standard Time,  
FrankCB at aol.com writes:

Then  with the meter 
still connected, start pulling out fuses,  one at a  time and check the meter 
after you pull each one.  Reinsert  each  fuse if the meter reading doesn't 
change. 
Once you find the  fuse whose  removal causes the battery drain to cease, 
then you know  that the shorted wire  or device is controlled by that  fuse. 


Frank and others,
A good method but please be aware that depending on the year of your  
Corvair, not all circuits (possible current drains) are fused. 
Regards,
Bob Helt