<VV> EM coupe window removal

[Bill Hubbell]

It is really not all that difficult, once you get the glass with channel out
of the car.  Carefully clamp the glass in a vise (gently!  use a towel on
either side) with the channel on top.  Now you can carefully pull the
channel off the glass.  You will need new channel liner material to install
new glass - should be able to get from a local auto glass repair shop.

Bill Hubbell


----- Original Message ----- 
From: "The Barneck's" <dougbee at comcast.net>
To: <virtualvairs at corvair.org>
Sent: Saturday, September 30, 2006 11:20 AM
Subject: <VV> EM coupe window removal


I posted earlier about any tips to remove the side glass on an early coupe.
I did not get any responses at all.  Surely someone has done this before.  I
could use some help... anyone?
Doug Barneck
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________