<VV> early model vent hose, for you smart guys

[Bill Hubbell]

Brian,

If you are talking about an early model convertible, there is no actual hose
in the rockers - the rockers themselves serve as the "hose".  However, on
the Coupes and Sedans there is a hose, and it can be removed (old one
usually brittle and pulls apart) and new one re-installed just by pushing it
in from the rear - been there, done that.

Bill Hubbell

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of
TTuttlelandscape at aol.com
Sent: Friday, April 13, 2007 10:20 AM
To: virtualvairs at corvair.org
Subject: <VV> early model vent hose, for you smart guys

all right for all you smart guys figure this one out:
 
i am doing rotisserie restoration on several early model corvairs
 
how do you replace the vent hose that connects under the rear seat and runs

through the rocker panel
 
according to the views and diagrams i have seen there is no possible way,
it 
must be installed before the rockers are welded
 
What are your thoughts?
 
Brian Tuttle
wpb
2-69 convert
3-64 spiders
1 rampside
2 corsa 



************************************** See what's free at
http://www.aol.com.
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________