<VV> Need a little help!

[J R Read_HML]

Are the gauges telling you anything when this happens?

Later, JR

----- Original Message ----- 
From: <Neilg1016 at aol.com>
To: <virtualvairs at corvair.org>
Sent: Saturday, April 21, 2007 4:32 PM
Subject: <VV> Need a little help!


>I have a '65 Corsa with the 140 engine.  It has about 600 miles on a
> complete rebuild by a corvair guy in Indy a couple of years ago.  It has 
> new carbs
> all around, a Pertronic II ignition, new plug wires and coil.  My 
>  problem -
> after tooling around for about a half hour, the car starts to buck and 
> stall.
> Up to that time it runs strong.  After it stalls, it will  start after two 
> or
> three tries but will only go a couple of blocks before  it stalls again. 
> Any
> ideas?
>
> Thanks!
>
>
>
> ************************************** See what's free at 
> http://www.aol.com.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.463 / Virus Database: 269.5.7/771 - Release Date: 4/21/2007 
> 11:56 AM
>
>