<VV> Re: Dummy Driveline

[J1M1SH at aol.com]

I just built a temporary setup using a Clarks lower relocating bracket on  
the strut arms and two halfshafts with metal channel welded between them to make 
 the centerline of the caps 43 1/8" bolts to the spindles and works fine. 
Just  pump the tires up to 40 pounds or so cause its like pushing a car with a 
spool.  But the back of the car is so light and bouncy it turns  anyway.



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour