<VV> LM Shoulder belts

[DaveL]

Thanks, that's what I needed.


----- Original Message ----- 
From: "James Davis" <jld at wk.net>
To: "DaveL" <lynchmob at theriver.com>
Sent: Friday, August 17, 2007 5:54 AM
Subject: Re: <VV> LM Shoulder belts


> On my 66 they are tapped for the standard GM seat belt bolt (7/16-20).
> Jim Davis
> 
> 
> 
> At 02:15 AM 8/17/2007, you wrote:
> >I'm trying to install a set of Clarks shoulder belts in my '67 
> >coupe. I have it mostly figured out except for the roofline mount. 
> >Since it's my daily driver I don't want to cut the headliner until I 
> >know for sure what the bolt size is for the existing hole. I'm 
> >assuming(ACK!) from what I've read on the '67, that it came set up 
> >for shoulder belts. I can feel the bracket and the hole through the 
> >headliner. What I need to know is, is the hole pre-threaded and what 
> >size/thread pitch?
> >  Thanks in advance.
> >
> >
> >Dave Lynch
> >'67 Monza pg/110
> >Tucson Corvair Assoc.
> >www.corvairs.org