<VV> suspected carb problem

[TimogensTurbo at aol.com]

In a message dated 2/25/2007 4:13:08 PM Pacific Standard Time, 
rcbmc at bentonrea.com writes:

> I've concluded that the problem must be with the fuel metering in the 
> carburetor on the driver side, which I removed today, expecting to find something 
> wrong with it internally. Nothing apparent. Floats float, needle seats well 
> and shuts off fuel, no apparent contact or binding between the float and the 
> bowl. Since the problem seems like it could be temperature related,
===============================================

You've most likely found the culprit.....but it's cold in you hand!    
Replace the inlet / needle - seat....or possibly just raise the float 1/8"...

Matt Nall...west coast
http://members.aol.com/patiomatt
lots of info!


**************************************
 AOL now offers free email 
to everyone.  Find out more about what's free from AOL at http://www.aol.com.