<VV> valve stem seals..

Harry Yarnell hyarnell1 at earthlink.net
Mon Jan 15 18:55:16 EST 2007


Yes, use them on the intakes. There's some debate as to whether you should 
put them on the exhaust.

harry yarnell
perryman garage and orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: <KELLYJRE at aol.com>
To: <virtualvairs at corvair.org>
Sent: Monday, January 15, 2007 6:51 PM
Subject: <VV> valve stem seals..


>I am getting the heads together on a 140, for the 68 monza.  Bought new
> valves and springs, guides are the old ones that were in the heads,  the 
> valve to
> stem clearance is good  (.002-.003) should I use stem seals on  the intake
> side, or as some suggest, run without them ? What do ya'll think ? (  I 
> plan on
> this being a daily driver )
>
> Ed Kelly
>
> Corsa S.C.
> 66 vert.
> 68 monza coupe
> 60 700 coupe
> lots and lots of junk corvairs.......
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
> 



More information about the VirtualVairs mailing list