<VV> Dang thing won't crank-help 1963, 110

[Zane Brock]

Well....not paying attention to the firing order clearly stamped upon the
engine tin, I used the handy elec diagram I bought from Clark's to rewire
the harness since I was already holding it. The harness data is correct. The
firing order is not. Whose fault is that...all mine...it's stamped in steel.

Thanks to all who helped. Nearly everyone asked if I had checked the wiring
right off the bat. Tech head that I am, of course it's right, I got it off
the schematic. Battery died trying, on the trickle now, will hit again in
the morning.

Regards, 
 
Zane Brock, Atlanta, GA
zanebrock at bellsouth.net
1963 Monza
1966 Mustang