<VV> Center section, early Air Cleaner

[Frank DuVal]

Was the AC version different than the non AC version, so the snout could 
clear the condenser?

How about, since the only center section on a 64 would be for AC, the 
other 64 version has something to do with an oil bath pre cleaner?

Frank DuVal

Bill Hubbell wrote:
> There are actually 5 different versions of this tube, two of which were used
> on 1964 cars.  Who can name all 5 of them and their applications?
>
> Bill Hubbell
> President, Stock Corvair Group
>
>
>
> -----Original Message-----
> From: virtualvairs-bounces at corvair.org
> [mailto:virtualvairs-bounces at corvair.org] On Behalf Of Frank DuVal
> Sent: Saturday, June 30, 2007 12:28 AM
> To: eddie iglar
> Cc: virtualvairs at corvair.org
> Subject: Re: <VV> Wanted Early Model Air Cleaner AssY
>
> Actually the early car and FC use a different center section on the air 
> cleaner setup. The car has a snorkle that sticks up and would hit the 
> engine cover. The FC version has air inlet grafted to the side of the 
> center section to allow the low engine cover clearance. I think the 
> other parts are interchangeable. 
>
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
>  _______________________________________________
>
>
>