<VV> Choke Pull Off

Michael Kovacs kovacsmj at sbcglobal.net
Sun Jun 24 15:44:13 EDT 2007


 I assume that you can see the choke jiggling a bit causing the link to the choke to vibrate??
   If you have a gage to check the vacuum where the choke hose is attached, the symptom would show up as a vibrating needle. It should be steady.
   
   My quess is that there is a problem with at least one of your valves. The choke is sensing an uneven vacuum. I would do a compression check or better yet a bleed down check if you have the instruments to do it. 
   
   
   
Rudy Korb <rudyandbrenda at sbcglobal.net> wrote:
  Hi all, need some help. I have a 67 Monza 110/pg and the right (as your facing the engine) choke pull off has a rattle sound when in gear and idleing. I thought the old one was bad so I replaced it and the new one does the same thing. The left one is just fine. The rattle stops when you give it some throttle, but returns when you get back to idle. At idle without being in gear and higher rpms, it works great. Just seem that this occurs at low rpm. What do I need to do??? 

Thanks for your help,

Rudy Korb
67 Monza Vert.
Rogers, Arkansas



MIKE KOVACS


More information about the VirtualVairs mailing list