<VV> 64 Engine in 65 / Oil leaks

[Secular]

  all that effort ---- all those hours into painting them psychedelic pink ...pooof :)

  huh !
----- Original Message ----- 
From: "Frank DuVal" <corvairduval at cox.net>
To: <TimogensTurbo at aol.com>
Cc: <VirtualVairs at corvair.org>
Sent: Saturday, March 24, 2007 2:06 PM
Subject: Re: <VV> 64 Engine in 65 / Oil leaks


>I agree with Matt.
> 
> I have never painted a set of pushrod tubes. Never had time!  Vitons 
> last a long time on bare metal tubes.
> 
> Who's gonna look at the nicely painted tubes? The mice living there?
> 
> Frank DuVal
> 
> TimogensTurbo at aol.com wrote:
> 
>>In a message dated 3/23/2007 10:26:50 PM Pacific Daylight Time, 
>>bars84crx at hotmail.com writes:
>>
>>  
>>
>>>1/2 of the drain tubes move - can't feel any o-rings at all - 
>>>pure metal to metal.  
>>>    
>>>
>>
>>SNIP
>>
>>  
>>
>>> Just wish I had some painted push rod tubes ready.
>>>
>>>    
>>>
>>===========================================================
>>
>>Normally the tubes are  STUCK  tight  when aged and having cooked "O-rings" [ 
>>original Buna-M's]
>>Hope you don't find what a few have...  someone's reamed the holes in the 
>>head and block!  WHY??  no ones ever figured out why..
>>
>>Painted PR  tubes.......old wives tale..her name is Richard F.  !!!    New 
>>oils..no need to worry about cooking the oil!
>>
>>Besides..if you do the job right..you'll never be under there again!!!  LOL!!
>>
>>
>>
>>Matt Nall...west coast
>>http://members.aol.com/patiomatt
>>lots of info!
>>
>>  
>>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
> 
>