<VV> Parts washer fluid

[George Jones]

I've got a 5 gal. can of Varsol with a screened bucket in it. Works fine for
what I need it to do.

On 3/30/07, Edelstein and Payne <eandp at mindspring.com> wrote:
>
>    I just use some stuff that I bought in a five gallon can from Advance
> Auto.  Don't remember what it was called.  Don't actually have a parts
> washer, but just a solvent tank that I let stuff sit in. Let aluminum parts
> sit for days/weeks and had no problems.
>     I can tell you, probably because of environmental concerns, the parts
> cleaners you can get these days don't work anywhere near as good as stuff
> you could get 10+ years ago.  That stuff probably had cholrinated
> hydrocarons (mixtures of carbon tet and other compounds) and would really
> strip oil and grease off of most stuff.  However, it's pretty volatile and
> the halogens (chlorine) are not good for the ozone.  So today we soak stuff
> for a week and then use LOTS  of elbow grease (something that is not always
> easy to get out of an 18 year old kid--- my son).
>
>                Travis Payne      65 Monza coupe
>                Raleigh NC
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>



-- 
__________________________________
George Jones
Corvair Society of America (Since 1987)
Tidewater Corvair Club (Since 1987)
Central Virginia Corvair Club (Since 2006)
'65 Monza Crown V8 Convertible   http://www.cardomain.com/ride/2397326
'66 Monza Coupe (Custom in work)
__________________________________