<VV> Another Rampie question

[Ron]

Why?  The pins work just fine.  I suppose you could use both the pins and 
the adhesive but if you use just the pins, it can be removed without 
breaking it.
RonH

----- Original Message ----- 
From: "Dennis & Debbie PLEAU" <ddpleau at msn.com>
To: <rchivers at tampabay.rr.com>; <virtualvairs at corvair.org>
Sent: Thursday, May 03, 2007 11:22 AM
Subject: RE: <VV> Another Rampie question


> Go to an auto parts store and get emblem adhesive, cut off the pins and 
> glue it on.
>
> dp
>
>
>>From: rchivers at tampabay.rr.com
>>To: virtualvairs at corvair.org
>>Subject: <VV> Another Rampie question
>>Date: Thu, 03 May 2007 09:43:58 -0400
>>
>>In repairing the tailgate on the rampie the holes for the 'Chevrolet'
>>emblem were covered up.  Will have to redrill the 4 holes for the
>>pins.  Have been trying to figure out the location based on various
>>pictures I have seen posted on the net.  However very few people seem
>>to take pictures of them from the back.  It looks like the bottom of
>>the script sits even with upper inner part of the cove.  Could some one
>>give me a measurement from the top or bottom of the tailgate ( and
>>please include if it is from the top or bottom)
>>
>>Thanks for all of your help would have never made it this far without
>>you
>>
>>    -Rex-
>>65 Vert
>>61 Rampie
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
>