<VV> 61 Rampie wheel bearing update

[Rex Chivers]

Ok got up this morning and pulled the wheel back apart.  Bearings and all 
looked fine.  Removed the inner bearing outer race and you could see signs 
where the race had started to spin in the housing.  Cleaned up the race and 
the hub and wiped down with solvent to remove any grease residual. 
Reinstalled race using loctite red stud and bearing mount.  BTW the spindle 
sizes are 1.249 for the inner bearing and .749  for the outer bearing.

In the event that the loctite fix does not work, are the hubs on the FC the 
same as the hubs on a LM ?  I know that the bearings are the same but am 
unsure about the rest.

Thanks for the help
  -Rex-
65 vert
61 Rampie