<VV> Floor plugs
Dave Ziegler
dziegler3 at comcast.net
Sat Oct 20 18:02:02 EDT 2007
I believe he is talking about the rubber plugs about an inch in
diameter, not the 2 x 3 oval metal plug.
Dave...
On Oct 20, 2007, at 2:14 PM, J R Read_HML wrote:
> You might have reproduction floor pans if you see just a stamped
> depression rather than an actual cover piece with a couple of screws
> in it.
>
> Later, JR
>
> ----- Original Message ----- From: "Ron" <ronh at owt.com>
> To: <tconnolly at iepfire.com>; <virtualvairs at corvair.org>
> Sent: Saturday, October 20, 2007 12:38 PM
> Subject: Re: <VV> Floor plugs
>
>
>> Strange, the floor plugs in my cars are solid and tight, except, that
>> is, on one wagon that had apparently been high centered on snow and
>> ice which sheared off several of them. The openings caused the
>> floors to rust out.
>>
>> RonH
>>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights
> are the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>
Corvair Therapy
mechanical repair
light restoration
More information about the VirtualVairs
mailing list