<VV> when pulling the fuel tank on a LM

[Harry Yarnell]

With BOTH wheels in the same direction (up or down) there's no tension on 
the sway bar; just unbolt it. Be prepared for snapping a few bolts...

harry yarnell
Poohbah of Perryman
perryman garage and orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "cfm" <cfmann at yahoo.com>
To: "Virtual Vairs" <virtualvairs at corvair.org>
Sent: Saturday, April 19, 2008 2:28 PM
Subject: <VV> when pulling the fuel tank on a LM


> When working on a late model, I see that if I pull the fuel tank, that the 
> sway bar needs to be moved or removed.
> Is the sway bar in tension when I have the car jacked up?
> Should I raise the front wheels with my floor jacks while the chassis is 
> in the air?
> Just want to avoid the "boing" factor... that's all. (no humor needed in 
> subsequent posts) most of us already laughed anyway :)
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>