<VV> tach

[Harry Yarnell]

What's a voltage meter? Voltmeter?... and how does a voltage meter send a 
'charge' thru the sending unit. The sending unit is the ignition coil.
The tach is a self contained unit that 'counts' pulses.
One side of the tach unit goes to the points; the other goes to +12 volts. 
There is no ground (per se).

harry yarnell
Poohbah of Perryman
perryman garage and orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: <sharpiebandit06 at bellsouth.net>
To: "Vair Club" <VirtualVairs at corvair.org>
Sent: Tuesday, April 29, 2008 10:08 AM
Subject: Re: <VV> tach


>I used a voltage meter to sending a positive charge through the sending 
>unit receiving side and put the ground on the ground terminal for the tach 
>and got no complete sicuit reading on the meter.
>
> Charles   4/29/08
> -------------- Original message from "Mr Lew Rishel" 
> <lewrish at sbcglobal.net>: -------------- 
>
>
> Need to know more data. What do you mean about voltage in one side. And 
> which do you mean by grounded side .
> Lew
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>