<VV> [FC] Master Cylinder Suggestions

shortle shortle556 at earthlink.net
Tue Apr 29 10:56:51 EDT 2008


I purchased my kit from Dave at the Source and am in the process of installing it along with all new brake lines.I have removed the fuel tank and will let you know the outcome. Wish me luck.

-----Original Message-----
>From: J R Read_HML <hmlinc at sbcglobal.net>
>Sent: Apr 28, 2008 10:44 PM
>To: Western Canada CORSA <westerncanadacorsa at shaw.ca>, Corvanatics at corvair.org, virtualvairs at corvair.org
>Subject: Re: <VV> [FC] Master Cylinder Suggestions
>
>I used Lon's dual MC on a stock Rampside.  Don't know that your setup would 
>need something different or not.  I've been happy.  It already saved me once 
>from a front tire/wheel rub on a rubber brake hose.
>
>Later, JR
>CCE CORSA CORVANANTICS SCG member
>'61 Rampside Standard 4/110
>'65 Monza Convertible 4/140
>
>----- Original Message ----- 
>From: "Western Canada CORSA" <westerncanadacorsa at shaw.ca>
>To: <Corvanatics at corvair.org>; <virtualvairs at corvair.org>
>Sent: Monday, April 28, 2008 11:40 PM
>Subject: [FC] Master Cylinder Suggestions
>
>
>> Hey all,
>>
>> I'm just about to venture into the "ugknown".  The front of my RS will be
>> getting 55-57chevy 2" drop spindles, it looks like from all the info I 
>> have
>> gathered that it's pretty much going to be a direct bolt in, with the
>> exception of the lower ball joint hole, which will have to be reamed out.
>>
>> Anyway, they come set up for '80 Chev Malibu front discs.
>>
>> To get the brakes set up right I want to put in a dual master, but am 
>> unsure
>> of what application's M/C I should use, any suggestions?  The stock FC 
>> drums
>> are staying on the rear.
>>
>> Regards,
>> Joel
>> _______________________________________________
>> Corvanatics mailing list
>> Corvanatics at corvair.org
>> http://www.vv.corvair.org/mailman/listinfo/corvanatics
>> This list sponsored by the Corvair Society of America, 
>> http://www.corvair.org/ 
>
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________



More information about the VirtualVairs mailing list