<VV> body work beginning

[J R Read_HML]

Sometimes the razor blade will do the trick.  Other times, not.  For the 
cost involved, it is certainly worth the try.

Later, JR

----- Original Message ----- 
From: "Jim Bannister" <jimster1 at earthlink.net>
To: <HallGrenn at aol.com>; <sharpiebandit06 at bellsouth.net>
Cc: <virtualvairs at corvair.org>
Sent: Friday, February 15, 2008 2:47 PM
Subject: Re: <VV> body work beginning


> Tho I haven't tried it, I understand that single edge razor blades do a 
> good
> job.  Just shave the pain off in big curls.
> Jim
>
> -----Original Message-----
> From: virtualvairs-bounces at corvair.org
> [mailto:virtualvairs-bounces at corvair.org] On Behalf Of HallGrenn at aol.com
> Sent: Friday, February 15, 2008 12:11 PM
> To: sharpiebandit06 at bellsouth.net
> Cc: virtualvairs at corvair.org
> Subject: Re: <VV> body work beginning
>
>
> In a message dated 2/15/2008 11:59:49 AM Eastern Standard Time,
> sharpiebandit06 at bellsouth.net writes:
>
> Can  anyone recommend the best non-sandblasting way I can strip the paint
> of.
>
>
> The only time I did a whole car (changed from metallic silver to red) I
> used
> a marine paint remover.  I've heard good things about the aviation  spec.
> paint removers as well.  I would lile to try the non toxic 3M  stripper 
> I've
> used
> at home sometimes, but I don't know if it will work.
>
> Bob (no cancer yet) Hall
> Group Corvair
> Kensington MD
> '64 Brier
> '65 Corsa
> 2 '68 Monzas
>
>
>
> **************The year's hottest artists on the red carpet at the Grammy
> Awards. Go to AOL Music.
> (http://music.aol.com/grammys?NCID=aolcmp00300000002565)
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________