<VV> NEW TYPE SHOP AIR PLUMBING
Kent Sullivan
kentsu at corvairkid.com
Sun Feb 17 23:06:04 EST 2008
I'm in Seattle. Not so dry. :-)
In any case, I have found that a properly-plumbed system with drains and
takeoffs from the top side (plus filters) seem to work just fine.
--Kent
-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Frank DuVal
Sent: Saturday, February 16, 2008 8:41 PM
To: virtualvairs at corvair.org
Subject: Re: <VV> NEW TYPE SHOP AIR PLUMBING
Yes, but you are from the dry west where the air pipes don't carry water
half the time! Here in the east in summer it is common to get more
water than air in industrial air lines. The amount of zinc inside
galvanized pipe is slim, but every bit helps in keeping rust particles
out of paint. Of course the filter should catch them! The galvanizing on
the fittings also helps fill the pin holes so common on these offshore
black iron fittings.
Frank DuVal
More information about the VirtualVairs
mailing list