<VV> FW: Re: dash measurements

Marc Marcoulides hharpo at earthlink.net
Tue Jul 22 13:43:22 EDT 2008


For the clock, I reccommend the conversion to quartz done by Lew Richel and others, works great

-----Original Message-----
>From: sharpiebandit06 at bellsouth.net
>Sent: Jul 22, 2008 10:18 AM
>To: Vair Club <VirtualVairs at corvair.org>
>Subject: <VV> FW: Re:  dash measurements
>
>That helps out a lot. I got an old corsa dash and cleaned it up to put into my Monza, but only one guage truly works and that's the fuel. I don't want to mess with repairing the gauges myself and having them restored is expensive and for the same price I could have all new autometer gauges put in with a little bit of modifications. currently my dash is installed in the car and I didn't feel like taking it out jsut to measure the gauges, so I thought someone might have some answers. I'll be replacing the gauges with a new: tach, speedo, oil pressure, oil temp, volts, fuel, 2 cylinder head temps, and a trans temp. So obviously by that measurement I have plenty of cutting room in the dash area. Thanks.
>
>Charles
>-------------- Forwarded Message: -------------- 
>From: "J R Read_HML" <hmlinc at sbcglobal.net> 
>To: "VirtualVairs AA" <VirtualVairs at corvair.org>, <sharpiebandit06 at bellsouth.net> 
>Subject: Re: <VV> dash measurements 
>Date: Mon, 21 Jul 2008 22:19:52 +0000 
>
>
>Monza and Corsa speedos are the same size. I have a defunct Corsa clock 
>here and the face measures between 1 7/8 to 2" depending on where I measure 
>it. Across the back, it is 1 3/4" not including the lip portion. The lip 
>is 2 1/4". Does this help? 
>
>Later, JR 
>
>----- Original Message ----- 
>From: 
>To: "Vair Club" 
>Sent: Monday, July 21, 2008 4:06 PM 
>Subject: dash measurements 
>
>
>> Hey, 
>> Can someone give me the measurements for the corsa gauge holes in the 
>> dash? 
>> 
>> Charles 
>> _______________________________________________ 
>> This message was sent by the VirtualVairs mailing list, all copyrights are 
>> the property 
>> of the writer, please attribute properly. For help, 
>> mailto:vv-help at corvair.org 
>> This list sponsored by the Corvair Society of America, 
>> http://www.corvair.org/ 
>> Post messages to: VirtualVairs at corvair.org 
>> Change your options: 
>> http://www.vv.corvair.org/mailman/options/virtualvairs 
>> _______________________________________________ 
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________





More information about the VirtualVairs mailing list