<VV> Jet Coatings

[Bob Bauer]

What has hapened is that they seems to coat too well.  When installed on the car  a 65  Monza  110  4 speed  with a CHT gugage, they seem to cool very well, my temp stays wasy down below  250.  But if I get up to speed, say 70 and hold it there, my temp climbs way up.  What  I have deduced is that the logs now do not radiate enough heat to cause the bellows to open, whaich accounts for the temp climb.  As the heat gets bvery high the bellows open, the temp drops and the bellows close then causing the temp to climb again.
   
   
  I had the logs coated on the outside, the intent was to keep the heat inside the log and push it out through the exhaust.  It apparently does that so well, not enough heat is there to open the bellows.
   
  Bob Bauer